联系我们   Contact

3x1 HDMI Switch SW301PM

更新:2016-01-04 11:36:28      点击:
  • 品牌:   COAS
  • 型号:   SW301PM
  • 在线订购
产品介绍

HDMI Switch 3x1

Model No. SW301PM

3 HDTV HDMI devices to be switched easily into one HDTV HDMI compatible monitor or projector.
Full HD 1080P/120Hz/60Hz
3D and 4K*2K support

Support X.V. Colour
Supports DTS/Dolby/DTS-HD/Dolby True HD/LPCM7.1/AC3 


Bi-direcional COAS IR control system
Receiver Range : 20 meter
Emitter Range :    6 meter
IR cable can be up to 300 meter 

SPECIFICATION

Input Port   :                       3xHDMI(Female connector),  

Output Port :                       1xHDMI(Female connector),

Input lead Max Length :        for 4K — 7M , for 1080P — 20M
Output Lead Max Length :     for 4K — 7M , for 1080P — 15M
Bandwidth :                          10.2Gbps
Output Resolution :               3840 x 2160@50/60, 480i — 1080P@ 50/60
                                             1080P@24/50/60 , VGA -UXGA
Operating Temp :                   -15°C~55°C/5°F~131°F


Deep Color :                          36bit
Housing :                              ABS
Dimensions :                          mm(L)x mm(W)x mm(H)
Weight :                                g
Power Supply Input :              100 -240V — 50/60 MHz ,0.3A max
Power Supply Output :            DC 5V —— 2000mA

PACKAGE CONTENTS

•1 x HDMI switch unit
•1 x Remote
•1 x 5V power adapter 

 •1 x User Manual


FEATURES

•HDMI, HDCP 2.0 and DVI compliant 

•Support full 3D pass-through

 •Support 4k x 2k high resolution 

.Support IR control

•Support CEC bypass
•External and internal EDID settings

.Dedicated LED indicator lights


INSTALLATION

•Connect HDMI input ports to the HD signal source equipments such as DVD player, Blue-ray player, Set-top box etc.

•Connect HDMI output port to the HDMI display.
•You can control the device using the supplied Remote by pointing 
to the built-in IR sensor.

•Connect to the IR Ext output with the IR receiver cable (optional) if you need to extend the distance of using the remote.

•Connect IR port with the IR blaster cable ( included in the package if needed for IR signal transmission. Place the IR blaster in direct line-of-sight of the equipment to be controlled.

•Connect the IR receiver cable ( included in the package if needed ) for IR signal reception. An adaptor is needed for connection. Make sure that the remote being used is in direct line-of-sight of the IR receiver.

•In case your HDMI device could not provide sufficient power, you can use the supplied USB cable and connect o your existing device for getting power to the unit. 



更多产品